SIN.EQRPT868XT
W.M-Bus 868 MHz / OMS EN 13757 Gateway.
Multi-hop support that allows the extension of the acquisition range between W.M-Bus 868 MHz /OMS EN 13757 radio device and W.M-Bus 868 MHz / OMS EN 13757 datalogger with Mesh Network technology. Patch installation. Configurable via SIN.EQSW1. Power supply 230V 50Hz.
GENERAL FEATURES
- W.M-Bus 868MHz Gateway with MESH Network technology
- Multi-Hop functionality
- Configurable via EQUOBOX TOOLKIT LITE software (SIN.EQSW1)
- multi-brand and multi-mode (S / T / C ) meters, heat cost allocators, ambient probes support
- Powered via mini-USB
- Fixed power supply via 220V AC mains which guarantees:
- large coverage area
- the decrease in network update time (in the order of minutes) with a respective decrease in commissioning time
- cancellation of the performance decrease effect depending on the state of charge of the battery and therefore constancy of performance over time
- zeroing of maintenance activities
|
ELECTRICAL CHARACTERISTICS |
|
|
Power Supply |
100..240 Vac @ 50-60Hz During setup/data reading: 5Vdc via USB port (500mA) |
|
Installation category |
Classe II |
|
Maximum consumption |
4.5W |
|
|
|
|
Temperature range |
Operating: -20°C to +55°C / Storage: -25°C to +85°C |
|
Dimensions |
160x160x35 mm (HxLxP) – DIN |
|
Mounting |
Wall-mounted, with screws |
|
Protection rating |
IP 40 (EN60529) |
|
|
|
|
Frequency |
868MHz - max transmission power 27 dBm |
|
The maximum distance between two RPT |
500mt with a free field - 40mt in building |
|
|
|
|
Reference standard |
EN13757-4 (Physical Layer), EN13757-3 (Application Layer) |
|
Supported application layer |
W. M-Bus, OMS |
|
Frequency |
868MHz (RPT868XT) |
|
Number of supported W.M-Bus meters |
500 |
|
W.M-Bus Mode |
S / T / T+C / S & T+C |
|
Modality of meters recognition |
Based on data reception Based on SND_IR message reception Import meters list from file |
|
|
|
|
Data retention |
The last sample received, 100 years |
|
|
|
|
Power Led |
Operating status |
|
Power led signal |
No. 4 led for displaying the signal strength of the wireless backbone network |
|
TX/RX Status Led |
No. 4 led to display the status of reception/transmission wireless network backbone and meters |
Check the Presetting List for pre-set objects with the Equobox system
YOU MAY ALSO BE INTERESTED
WELCOME in SINAPSI's STORE !
We are SINAPSI, we are Italian and we have been passionately involved for almost 20 years in engineering, producing and distributing
devices and systems for monitoring consumption, energy and all sizes in the field.
Through our work we believe and want to generate savings, sustainability and give value to those who use our devices and contribute to a better world.