SIN.EQLC1

Level Converter of the EQUOBOX system.

M-Bus level converter for managing up to 60 devices.
Field module for reading data from M-Bus meters. Stand-alone module for use with SIN.EQSW1.
M-Bus slave interface for use as booster/repeater to extend the M-Bus network by a further 60 devices.

GENERAL CHARACTERISTICS

  • Master function for M-Bus cable networks with modularity to 60 physical devices
  • Up to 6 level converters in an M-Bus network with up to 360 physical M-Bus devices
  • Supports up to 1,000 logical devices in an M-Bus network
  • Booster/repeater function via M-Bus slave port
  • Led status indication (USB Activity, TXD, RXD, M-Bus Error, M-Bus Ready, Power)
  • No local memory
  • Query via PC with USB cable and EQUOBOX TOOLKIT LITE software (SIN.EQSW1) for data export to csv, xls
  •  Reading M-Bus devices via third party systems/software via RS232 port
  • Slave function for SIN.EQRTUxx data loggers
  • 24V AC/DC power supply

Login to add products to your cart
ELECTRICAL CHARACTERISTICS

Rated Voltage

24Vdc +/- 10% (Rev. HW 1.0 or if not specified)

24Vdc +/- 10%, 24Vac (min 20Vac, max 40Vac) 50/60Hz for HW 2.0 versions

 

(*) It is suggested to prefer continuous power supply (dc) in order to limit thermal dissipation and consumption

Installation category

Class III

Rated consumption

3W + (0.07* number of M-Bus loads)

Maximum consumption

12W

MECHANICAL FEATURES 

Operating temperature range

From -20°C to +55°C

Storage temperature range

From -25°C to +65°C

Dimensions

90x71x62 mm (HxLxD) – DIN

Installation type

35mm DIN bar (EN60715)

Protection rating

IP20 (EN60529)

Connections

M-Bus Slave: to connect as a repeater/extender

M-Bus Master: for connection to the M-Bus meters

Mini-USB Type B: for connection to the EQUOBOX TOOLKIT (SIN.EQSW1) software

Installation and positioning

It is suggested not to place the device in adherence with others in order to avoid their overheating

M-BUS SECTION 

Reference standard

EN13757-2 (Physical Layer)

Baud rate

Min. 300bps – Max. 9600bps

M-Bus-RS232 isolation

1KV AC

M-Bus-USB isolation

1KV AC

Max. number of M-Bus devices (loads)       

60

Max. number of Repeaters

Unlimited in stand-alone mode for reading current data via an RS232 or USB connection

Four (4) as slaves to the EQUOBOX RTU M-Bus      

Transmission speed

Minimum: 300bps

Typical: 2400bps

Maximum: 9600bps    

Bus voltage

42V – 30V

Short circuit protection

Yes

SIGNALING LEDs 

 

USB Activity (orange LED)

Connection status with EQUOBOX TOOLKIT software

TXD (Green LED)

Transmission status on the M-Bus Master

RXD (Green LED)

Reception status from the M-Bus Master

M-Bus ERROR (Red Led)

Indicates a short circuit or the overloading of the M-Bus

M-Bus Ready (Green Led)

Indicates level converter is ready to work

POWER (Red Led)

Indicates the correct power supply of the device

Check the Presetting List for pre-set objects with the Equobox system

SIN.EQRTUEVO1T
M-Bus/Wireless M-Bus DATALOGGER
SIN.EQSW1
EQUOBOX TOOLKIT LITE
SIN.EQRTU1
M-Bus DATALOGGER
SIN.EQRTU1X
M-Bus/Wireless M-Bus DATALOGGER
SIN.EQRTU4
M-Bus DATALOGGER 20 Dev.
SIN.EQRTU1T
M-Bus/Wireless M-Bus DATALOGGER

YOU MAY ALSO BE INTERESTED

WELCOME in SINAPSI's STORE !
We are SINAPSI, we are Italian and we have been passionately involved for almost 20 years in engineering, producing and distributing
devices and systems for monitoring consumption, energy and all sizes in the field.
Through our work we believe and want to generate savings, sustainability and give value to those who use our devices and contribute to a better world.