SIN.EQRPT868X

W.M-Bus 868 MHz EN13757 unidirectional extender.

Single-hop support. Patch installation.
Configurable via SIN.EQSW2. Power supply 230V 50Hz.

W.M-Bus 868MHz standard extender
Single-Hop functionality
Configurable via software (SIN.EQSW2)
Support meters, heat cost allocators, ambient probes, multi-brand and multi-mode (S / T / C )
Powered via mini-USB
Fixed power supply via 220V AC mains which guarantees:
- no device lifetime limitation
- large coverage area
- cancellation of the performance decrease effect depending on the state of charge of the battery and therefore constancy of performance over time
- zeroing of maintenance activities

ELECTRICAL CHARACTERISTICS
Power Supply	100...240 Vac @ 50-60Hz During startup/reading data: 5Vdc via the USB port (500mA)
Installation category	Class II
Maximum consumption	4.5W
MECHANICAL CHARACTERISTICS
Temperature range	Operating: -10°C a +85°C / Storage: -10°C a +85°C
Dimensions	160x160x35 mm (HxLxP) – DIN
Mounting	Wall with screws - Pole with optional kit
Protection rating	IP 40 (EN60529)
W.M-BUS NETWORK INTERFACE
Reference standard	EN13757-4 (Physical Layer), EN13757-3 (Application Layer)
Supported application layer	Radio M-Bus, OMS
Frequency	868MHz – Max transmission power: 27dBm
W-Mbus Mode	S / T / C / C + T
Modality of meters recognition	Based on data receipt Based on the SND_IR message receipt Meters list import from file
USER INTERFACE
Power Led	Operating status
TX/RX Status Led	No. 2 LEDs to display the status of meters receive/transmit