SIN.AL15W24VDCHD

DIN rail power supply, one DIN module size. Vout=24V DC, Iout=630mA Pout=15W

GENERAL FEATURES

  • Universal AC input/Full range
  • Protections: Short Circuit/Overload/Over voltage
  • Cooling by free air convection (working temperature: -30 ~ + 70 ° C)
  • Can be installed on DIN rail TS- 35/7.5 or 15
  • Isolation Class II 
  • LED indicator for power on
  • No-load power consumption <0.3W
  • 100% full load burn-in test
  • 1 year warranty
Login to add products to your cart

OUTPUT

DC Voltage

24 V

Rated current

0.63 A

Current range

0 ~ 0.63 A

Rated power

15.2 W

Ripple & Noise (max.) Note 2

150 mVp-p

Voltage Adj. range

21.6 ~ 29 V

Voltage tolerance Note 3

± 1.0%

Line regulation

± 1.0%

Load regulation

± 1.0%

Setup, rise time

2000 ms, 80ms/230VAC; 2000ms,80ms/115VAC at full load

Hold up time (Tip.)

30 ms/230VAC; 12ms/115VAC at full load


INPUT

Voltage Range

85 ~ 264 VAC ; 120 ~ 370 VDC

Frequency range

47 ~ 63 Hz

Efficiency (Typ.)

86%

Tensione AC (Typ.)

0.5 A / 115VAC ; 0.25 A / 230 VAC

Inrush current (Typ.)

cold start 25 A / 115VAC ; 45 A / 230 VAC


PROTECTION

Overload

110 ~ 145% rated output power;
Protection type: constant current limiting, recovers automatically after fault condition is removed

Overvoltage

30 ~ 36V Protection Type: Shut down o/p voltage, clamping by zener


ENVIRONMENT

Working temp.

-30 ~ +70°C (Ref. Derating curve)

Working humidity

20 ~ 90% RH non – condensing

Storage temp. humidity      

-40 ~ +85°C , 10~95% RH non – condensing

Temp. coefficient

±0.03%/°(0~50°C) RH non – condensing

Vibration

10~500Hz, 2G 10min./1cycle, period for 60 min. each long axes x,y,z

Mounting

Compliance to IEC60068-2-6

Operating altitude

2000 meters


SAFETY & EMC 
 NotE 4

Safety standards

UL60950-1, UL508, TUV EN61558-2-16, IEC60950-1 approved
Design refer to EN50178, tuv EN60950-1

Withstand voltage

I/P-0/P:3KVAC

Isolation resistance

I/P-O/P: 100M Ohms / 500VDC /25 °C / 70% RH

EMC emission

Compliance to EN55032 (CISPR32), EN61000-3-2-3 Class A, EN55024, EN55035, EN61000-6-2, EN61204-3

EMC immunity

Compliance to EN61000-4-2,3,4,5,6,8,11 Level 3,4 criteria A

OTHERS

MTBF

1166K HRS min. MIL-HDBK-217F (25°C)

DIMENSIONS

17,5*90*54,5mm (W*H*D)

PACKING

78g; 160pcs/13.5Kg/1.19CUFT

NOTE

  1. All parameters NOT specially mentioned are measured at 230VAC input rated load and 25°C of ambient temperature.

  2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uf & 47 uf parallel capacitor.

  3. Tolerance: includes set up tolerance, line regulation, and load regulation.

  4. The power supply is considered a component that will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

  5. Constant current operation region is within 50% ~ 100% rated output voltage. The protection type for short circuit is hiccup mode and will recover automatically after the fault condition is removed.

WELCOME in SINAPSI's STORE !
We are SINAPSI, we are Italian and we have been passionately involved for almost 20 years in engineering, producing and distributing
devices and systems for monitoring consumption, energy and all sizes in the field.
Through our work we believe and want to generate savings, sustainability and give value to those who use our devices and contribute to a better world.